Kawasaki Ninja ZX-6R Forum banner

Is there a faster way to disable the air injection?

671 views 4 replies 3 participants last post by  Steel  
#1 ·
Wanting to get my bike tuned so I don't smell like half burnt gasoline every time I get off it. Rather than remove the entire air injection system, is there a simple little inlet you can just cover in the air box? Some aluminum tape perhaps?

2012 ZX6R
 
#2 ·
Bro, I'll just say its a hell of a lot better to run the bike rich than it to run it lean.

Please don't place tape on or near your throttle bodes or volocity stacks if you value the bikes life...
 
#4 ·
oh god, thank you. i totally misinterpreted your original post. i thought you were trying to limit actual airflow into the bike for some reason, not from the clean air system. but you dont need a dynotune for that mod, you can remove it without worry.
 
#5 ·
Wanting to get my bike tuned so I don't smell like half burnt gasoline every time I get off it.
But how else can you let everyone know you rode your bike recently?!

Thought it was just a little vacuum line attached to the airbox I could maybe cover the hole for from the inside and take back off after dyno tuning.
If it's just a vacuum line then head to your local auto parts store, they usually have a little box filled with vacuum caps for like 7 bucks. Comes in more handy than you'd expect. Otherwise I'd just get a couple inch length of hose and stick a bolt through it with a hose clamp.