Kawasaki Ninja ZX-6R Forum banner

WTB: Muzzy Muffler

669 Views 6 Replies 3 Participants Last post by  Brad055
As the title states, i am looking for a slip on Muzzy muffler with an inlet diameter of 2 1/4".

I would like a shorty muffler (around 10") but would settle for something longer and would probably just cut it down myself. It doesn't have to be in perfect condition, but please no junk. Shoot me a PM with what you have or post up below.

Thanks in advance
Not open for further replies.
1 - 7 of 7 Posts
You did not specify for what year but this guy is selling on on the forum

It will not be going on a motorcycle, just needs to have an inlet diameter of 2" or 2-1/4" and then i am planning on cutting it to about 10" in length. I saw that gentleman's ad, $350 is a bit steep for just the muffler. I can find them on Ebay for around $150 but figured i would try here before i go the Ebay route.

Thanks for the help though!
  • Like
Reactions: 1
I have a full size carbon muzzy can from a 04-05 zx10r. Not sure of the inlet diameter, but will be out there in a few hours and can measue it. It has a small crack in the carbon about an inch or two in length, but of you're cutting down to 10" you can easy get rid of it. I have a few photos on my photo bucket..


Will post back soon with inlet diameter if interested.-Steven
2 1/4 inlet I.d., also have the mid pipe if needed.-Steven
Swopesy, you have a PM
Bump stilll looking! Looking for something with a 2 1/4" inlet diameter, length of the pipe doesn't matter (it will be cut down to 10" in overall length).
1 - 7 of 7 Posts
Not open for further replies.