Kawasaki Ninja ZX-6R Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
243 Posts
Discussion Starter #1
Okay, somebody tell me what this zip tie thing is. I feel like a noob.:banghead
:thatsgay:stupid:confused:O:coocoo:beer2:
 

·
Registered
Joined
·
483 Posts
its basically putting zip ties on the inside of the groove that the throttle cable slides in on the clip on. this makes the diameter of the groove larger, thus giving a more narrow throttle travel. so if before you could turn the throttle by 75 degrees, with this mod it would only turn 45 (numbers are made uo)
 

·
Registered
Joined
·
243 Posts
Discussion Starter #3
Drrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr, that's simple.lmao! Thanks
 

·
Registered
Joined
·
1 Posts
its basically putting zip ties on the inside of the groove that the throttle cable slides in on the clip on. this makes the diameter of the groove larger, thus giving a more narrow throttle travel. so if before you could turn the throttle by 75 degrees, with this mod it would only turn 45 (numbers are made uo)
I lost me on word 2.
 

·
Registered
Joined
·
8,439 Posts
you do have to glue with epoxy etc to get them to stay in one place and file and sand and fit and make damn sure they do not have any possible way to come off and in turn make your throttle stick

There are far better ways to do this!!!!!!!!!! zip ties are not the hot ticket!!!
 

·
Registered
Joined
·
13,212 Posts
Damn. Thread from the grave!!

Basically, it lets u get to full throttle without having to turn the throttle as much.
 
1 - 8 of 8 Posts
Top