Kawasaki Ninja ZX-6R Forum banner

Speedo stopped working

840 Views 3 Replies 4 Participants Last post by  Mikezx6
Today I changed my sprocket cover and now my speedo stopped working. Ive checked to make sure the sensor was on, made sure it was tight. any ideas?
1 - 4 of 4 Posts
Maybe the sensor came unplugged at the other end?
Sounds like installer error if it worked before you had touched it, and now after you touched it, it no longer works. I'd double check, and even triple check to make sure you've plugged it in correctly/and or didn't ruin the plug when you pulled it apart
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top