Kawasaki Ninja ZX-6R Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
216 Posts
Discussion Starter · #1 ·
Looking for an extra rear wheel for my 2013 ZX6R race bike, figure it will be much more convenient swapping tires mid-race day this way. Question is are the 09+ wheels the exact same thing? Do I need to fudge around with spacers or anything like that or is it a straight swap? I'd run different sprocket, but rotors/spacers all the same?

Thanks!
 

·
Registered
Joined
·
144 Posts
can you show me a picture of this sensor ring? did not know about this...

I was thinking of buying this guy Kawasaki zx6r 636 Ninja Limited 2013 12 11 10 Rear Rim Wheel Straight | eBay but it seemed steep, no rotor or sprocket on that.

where would I get a sensor ring as well?
Did anyone figure this out? I am looking to buy a set of 09-12 wheels for my 2014 636 to put slicks on them.

What extra stuff would I need to fit the 09-12 front and rear wheels to the 13-15 636?
 

·
Registered
Joined
·
577 Posts
nothing, just the spacers from your 13-15. the 05- current model is the same wheel front and rear except for the step height on the 13-15 for the speed tone rings. the tone rings mount on the older wheels just fine. Ski
 

·
Registered
Joined
·
577 Posts
he asked if it made a difference abs or not (he asked about rear wheel only, so the rotor will be the same). the wheels will work abs or not... 05-15, front and rear. you may need spacers or rotors, speed rings ect... for the correct year you are putting the wheels on for the front. Ski
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top