Kawasaki Ninja ZX-6R Forum banner

rear MC build

445 Views 1 Reply 2 Participants Last post by  shocker35
So I took the rear MC apart but it was all froze up. Let it set in PB blaster over night and it helped some but I eventually took a punch and knocked everything lose but I know that the order all the parts came out as isn't the order they are supposed to be. Of anyone has done this please let me know. All I pulled out was a spring, comp piston with seal, and a rubber boot.
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.