Kawasaki Ninja ZX-6R Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So recently my 99 ZX6R G2 drop and inlet valve so I've had to rebuild the engine. I have nearly finished the rebuild but i'm having an issue.
I have power to the coil but no spark.
I also have power to the starter motor but it's not turning over.
It is grounded properly and isn't a faulty coil pack or starter motor
Any advise would be greatly appreciated
 

·
Registered
Joined
·
4,415 Posts
So recently my 99 ZX6R G2 drop and inlet valve so I've had to rebuild the engine. I have nearly finished the rebuild but i'm having an issue.
I have power to the coil but no spark.
I also have power to the starter motor but it's not turning over.
It is grounded properly and isn't a faulty coil pack or starter motor
Any advise would be greatly appreciated
Those are definitely separate issues.

How do you know it has no spark if you cant turn the engine over?

Anyway, pull all the plugs, put a socket on the nut at the end of the flywheel and turn the motor over by hand. If it spins, great, then start to look into your starter circuit. If not, that is likely your spark issue too.
 

·
Registered
Joined
·
13,313 Posts
If you know for sure the starter is good but it wont turn whe u give it power then your engine is jammed.
 
1 - 4 of 4 Posts
Top