Kawasaki Ninja ZX-6R Forum banner

1 - 20 of 93 Posts

·
Registered
Joined
·
5,038 Posts
Discussion Starter #1
These charts contain quarter-mile time and speed, roll-on times, and top speeds for the 6R and 6RR. These are to be used as a guide only as numbers change depending on mods, rider, conditions etc.

ZX636


Year-------Quarter Mile
-------60-80(Sec)---80-100(Sec)---Top Speed(MPH)
97---------11.10 @ 123.5------N/A----------N/A-----------152.3
98---------10.97 @ 123.35-----4.5----------5.22-----------158.3
99---------10.70 @ 126.13-----4.56---------5.58-----------156.7
00---------11.07 @ 123.30-----4.66---------5.59-----------149
01---------10.93 @ 12.81------4.52---------5.07-----------154
03---------10.67 @ 131.0------4.34---------4.3------------158.5
04---------10.50 @ 130.4------4.05---------3.8------------N/A
05---------10.38 @ 135.6------3.5----------3.51-----------N/A
06---------10.58 @ 132.84-----3.68---------3.6------------166.1


ZX6RR

03---------10.94 @ 127.3------4.76---------4.56------------N/A
04---------10.78 @ 127.7------4.1----------3.65------------N/A
05---------10.90 @ 129.5------3.81---------3.76------------N/A
06---------10.87 @ 129.04-----3.79---------3.66------------156.9
 

·
Registered
Joined
·
764 Posts
Should break this down stock and modified. Also I will have an 07 time July 21st :D
 

·
Registered
Joined
·
764 Posts
Right on. :)
 

·
Registered
Joined
·
590 Posts
Nice, now i can see how i can stack up to those numbers
 

·
Registered
Joined
·
1,927 Posts
Good job Quarkz :hail

9.3mph better off over 9 years. (Depending on the month of the test, it might be 9.3 in 9.3 :laugh)
 

·
Registered
Joined
·
29 Posts
Can we get a dyno thread too with power, torque, temp, location, and mods?
 

·
Registered
Joined
·
503 Posts
Good thread Quarkz!




sure my '03 B1H will do a sub 10 second quarter though...........
probably over 200 mph too......................
and it's got over a thousand horse power..............
 

·
Registered
Joined
·
30 Posts
Caker Chris .....


I am just curious to know if you have ran your bike at the drags yet ????

I have an 05 with similar mods to your bike.

63SIX
 

·
Registered
Joined
·
1,195 Posts
why do I feel like the hp and tq numbers for the '07 is like this big secret? Cant find ANY info... it seems like everyone with an '07 is too busy riding they dont go to the dyno? lol
 

·
butiwasgoingtotashistatio ntopickupsumpowerconvrtr
Joined
·
2,762 Posts
why do I feel like the hp and tq numbers for the '07 is like this big secret? Cant find ANY info... it seems like everyone with an '07 is too busy riding they dont go to the dyno? lol
someone on this site has had his 07 dynoed quite a bit i think..like..before and after mods etc.

is it reaper/n00bftw? i think that's who it is.
 

·
Registered
Joined
·
30 Posts
Honestly ... those QTR mile times are bullshit.

no way a stock 600 bike can pull low 10's.

Low 11 ... high 10 maybe.

the current Australian record for a stock 600( GSXR ) is 10.25 sec and that is lowered.I know of a guy on a 04 636 cc with minimal mods ( power commander slip on Akro,filter and down 1 tooth on the sprocket ) stock height his best is 10.90 secs

cheers 63SIX
 

·
Registered
Joined
·
118 Posts
You gotta think about it mate.These 1/4 times could be on normal bitumen or Kawasaki's test facility.Where as at a regular drag strip.....well there can be a fair bit of wheel spin on street tyres.
 

·
Registered
Joined
·
30 Posts
Most people that talk " QTR mile times " refer to them on a drag strip.Any
proper time is always measured on a drag strip.A drag strip definately has more grip than a bituman road.

So..... can somebody show me proof of a stock 05 636cc running 10.38 sec ......

I won't hold my breath :)

cheers 63SIX
 

·
Registered
Joined
·
118 Posts
Mate I used to crew on drag bike team.We ran "drag slicks" because street tyres don't cut it.
 
1 - 20 of 93 Posts
Top