Kawasaki Ninja ZX-6R Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
15,655 Posts
Also worth mentioning, if a connector got so hot that it melted there’s a very good chance that the pins inside it were corroded. Corrosion is almost always higher resistance than refined metal. That resistance creates the heat that melts the plastic plug body.

If that has happened in one plug, it’s happening in many others. Do yourself a favor and take each Plug/receptacle pair you can find , break the connection, flood the female side with dielectric grease before you mate them again.
 
1 - 1 of 1 Posts
Top