Kawasaki Ninja ZX-6R Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter #1
I just bought some mods for my bike. i got the all in one tail light that has the turn signals in the tail light and some vortex frame sliders and am having some problems with how you install the sliders. the tail light was not much of a problem due to fact that my dad is an electric specialist. the bolts that hold the sliders in place apper to be the same bolts that hold the engine in place so what i want to know is do you have to support the engine well installing them or can you just do them one at a time? any help would be great.
 

·
Registered
Joined
·
5,038 Posts
I just did mine one at a time, no problems.

Getting the bolts out was another story though.
 

·
Registered
Joined
·
389 Posts
Just do them one at a time you wont have any problems with the enigine. Make sure you don't overtighten them though. The tourqe specs on the 03' is 33ft/lbs. Hope this helps.
 

·
Registered
Joined
·
29 Posts
Discussion Starter #5
thank you guys so much. most of the local bike shops just said to bring it in and they would take care of it (at a cost of $100)
 

·
Registered
Joined
·
389 Posts
thank you guys so much. most of the local bike shops just said to bring it in and they would take care of it (at a cost of $100)
$100 that's crazy. A prime example of why there called stealerships right there.
 
1 - 6 of 6 Posts
Top