[Sghetti]

What weight is it sprung for?


Sent from my iPhone using Tapatalk

 

[sbk1198]

GP Cartridge Fork Internals. Great shape. 600$ Ready to install in 2013 and up zx6r ( can be fitted to 09 and up also)

Not as familiar with GP cartridges...do the springs sit at the bottom on these or the top? Also I see there are none in the picture, so are you not including any springs with these?

 

[speedmotoco]

I have used .925 to 1.0 on this setup. No springs. Springs at top just like ohlins.

 

[sbk1198]

I have used .925 to 1.0 on this setup. No springs. Springs at top just like ohlins.

Are the springs needed for this specific to GP, or do other brand springs fit as well, like if you get them from Ohlins, RaceTech, etc.?

 

[speedmotoco]

same s as ohlins - RT- Stock..... I have had all 3 types on these cartridge's.

 

[darkgoblin]

The 09-12 forks are 51 mm, and I believe the 2013+ forks went back to 50 mm like the older gens. So will this easily fit in the 09-12 forks, or will it take some adapters and/or modification?

 

[speedmotoco]

I am not sure what they did to install. I know they used the same caps. As stated above i used .925 to 1.00 depending on track. Barry at KFG installed them on 2016 bike . They were in the 2009 bike forks then he swapped over to the 2013 up forks.

 

[Backmarker]

I've moved my GP cartridges between several bikes from '09 to '19 using a professional installer.

It can be done.

 

[speedmotoco]

Tim! My favorite!