Kawasaki Ninja ZX-6R Forum banner

Can anyone help me out here?

599 Views 2 Replies 2 Participants Last post by  subiedude09
2
Im looking for the dimension's of a bolt. I searched the service manual and was unsuccessful. This bolt holds on the rear brake line guide to the swingarm. I bought my bike used and the guy before me ziptied the brake line in place. I purchased the guide, but it didnt come with hardware. I will be making a stop at my local hardware store for a bolt, but i dont know what thread pitch and size im looking for.

Can anyone help me out?


See less See more
1 - 3 of 3 Posts
2007 Kawasaki NINJA ZX-6R (ZX600P7F) Rear Master Cylinder | PartsFish.com

Here is a breakdown for the 07 ZX6R for what your looking for. The part number is 130 and it says it is a 6x16 bolt.

Edit: You might want to be sure that the guy didn't break the bolt off in the swingarm instead of just losing it and never replacing it. Just a thought
  • Like
Reactions: 2
2007 Kawasaki NINJA ZX-6R (ZX600P7F) Rear Master Cylinder | PartsFish.com

Here is a breakdown for the 07 ZX6R for what your looking for. The part number is 130 and it says it is a 6x16 bolt.

Edit: You might want to be sure that the guy didn't break the bolt off in the swingarm instead of just losing it and never replacing it. Just a thought
Thanks Yellow! I didnt think of that....fingers crossed he just lost the bolt or something. I'll check tonight when i get home. Thanks again man, I appreciate it!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top