Kawasaki Ninja ZX-6R Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi,

My name is Mike and I own a 2005 zx6r 636, and have determined that my regulator/rectifier is not doing what it is supposed to be doing. When the bike is own the voltage is only reading a little over 12 V. I know it should be around at least 14 V to charge the battery. I have replaced the part and immediately the connections became fried. I put a friends spare part on the bike and now it's only reading 12.5 V with the bike revved at 4000 rpms.

Do you think my connections need to be checked? My Stator was tested and turned out to be ok. I'm just confused and don't understand what the problem maybe.

Thanks
 
1 - 1 of 1 Posts
Top