Kawasaki Ninja ZX-6R Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
9,525 Posts
Looks like CHINESEUM trash to me............

and instead of drilling holes in the pistons why not simply hydraulically push them out with the brake lever (still connected) or with shooting compressed air into the brake fluid feed hole......... use a thin piece of wood between them so they cannot actually come out completely- thus all of them can come out 90% of the way........
then simply remove the wood, grab them and twist and pull them out one at a time

that way you do not need new pistons- just seals........
 
  • Like
Reactions: RJ2112
1 - 1 of 1 Posts
Top