Kawasaki Ninja ZX-6R Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
129 Posts
Discussion Starter #1
Ok I would like to get this straightened out and get the right info here. Some things I've read about the ckleen air mod people are saying its removing the PCV type system going to the air box. From my understanding it's basiclly like an air pump on a car, pumping oxygen into the exhaust to help the cat. I want to remove this for tuning purposes because I want my bike custom tuned in the spring and that will clearly throw off my readings. But I also dont want the blow by gasses from the crank case going into my air box after I remove the air pump. So...

1. Can anyone tell me where they are getting their block off plates for the 07 zx6r. I've looked at Ivan's but they don't list pictures or pricing on their website.

2. Has anyone else routed their hose from the crank case so it's not going into the air box? I don't want those oily gases back into my intake I want just clean fresh air. Thanks!
 
1 - 1 of 1 Posts
Top