Kawasaki Ninja ZX-6R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 20 Results
  1. The ZX6R
    I’ve been on a journey of making my 2006 zzr600 great again after buying it off a guy who was doing the infamous street fighter conversion to it(haphazardly might I add) I am very very inexperienced when it comes to wiring and electrical things, I bought new fairings, and a new headlight...
  2. Mechanical and Technical
    Hi all, new to the forum. Had a bit of a search around for some kind of answer with no luck. I've had a 03 zx636 since 2007, it was stolen and recovered with a lot of body/cosmetic damage but still runs. Wondering if the running gear would fit a 91 zzr 600 frame? I can get the zzr cheap but...
  3. Mechanical and Technical
    I'm not exactly sure where to post this but it looks like it could be a mechanical thing so my brain thought that this is where it belongs. I had to lay her down. Brake and clutch lever are bent. Still usable but it's bent down and looks bad so I want to change it. I've looked for about 4 days...
  4. Mechanical and Technical
    Im looking at a 2004 zzr600e, would I be able to purchase a zzx600j1 or j2 frame and motor swap it? Would I be able to just strip down the 600e and swap everything to the j1/j2 ? Would those parts cross ?
  5. New Member Introductions
    I just got my first bike not long ago. It's a 2005 ZZR600 which is basically a 2000 ZX-6R. It's old so there's a lot of work to be done. By the looks of it, I might be heading towards the streetfighter/cafe racer type build. I'm 22 years old. I think I got the bike at around September of 2022...
  6. Mechanical and Technical
    Hello everyone, so I have a 2007 zzr600 (not a zx6r, I know, but basically the same platform). A while ago I rode it home perfectly fine only for it to not start. Now I know there are a ton of similar forum posts, but I wanted to list the specifics I've tried. So basically; cranks but won't...
  7. The ZX6R
    Okay so I bought a 1998 zx6r is very rough condition took fairings off and frame ended up being cracked. Bought a new frame off a 06 zzr600 everything fit like a glove but now my bike is sitting 5inches higher, my forks also seem to be at a weird angle I’m at a loss every thing was removed and...
  8. The ZX6R
    Recently purchased a 03 ZZR600 with no fairings but good mechanicals. Looking to switch up the style for the fairings and was hoping to put on the 00-02 ZX-6R fairings. From what I read, these should fit? Also any sites recommended for parts? Also buying some parts as well so message me if you...
  9. The ZX6R
    With only 3800 miles I'm dealing with some issues. -What can I do about a high idle that cannot be fixed with the idle adjustment screw on the left side on the bike? -I pulled the carbs and cleaned the main and pilot jets to fix a rpm spike inbetween upshifts, it helped with that but I'm still...
  10. Mechanical and Technical
    What's up fellow riders, I have a 2008 ZZR600 I have converted into a street fighter. Just recently did a rad flush and it began experiencing cooling issues. After replacing the rad, fan switch, fan, thermostat, and hoses, I found that my little guy decided to shove a socket and adapter into the...
  11. Want to Buy
    WTB, a stock muffler for 2000-2002 ZX-6R, or 2005-2008 ZZR-600. Have you changed to aftermarket exhaust and got your stock one sitting on a shelf? Thanks for any leads. John M. in Kent, WA.
  12. Want to Buy
    I wish to buy a used aftermarket exhaust system (full) in excellent condition. Hope to come across someone with a full Muzzy exhaust for sale but will consider Yoshimura, Hindle, Brocks, or others as long as the system is in excellent condition. I've searched all the common sales forums such...
  13. New Member Introductions
    Today I finally joined the 2 wheeled club and for a deal too! This is my 2008 Kawasaki ZZR600. It needs a little work (fairing damage & brake handle has some scratches) but I'm happy. The bike hasn't been ridden in 2 years sitting in storage so battery needs to be charged/replaced as well...
  14. Pictures
    After seeing different options an exhaust "change" has been on my radar. It rained all day so I figured a trip to Lowe's & my job was on the agenda. Full length can 21 1/4" 7" removed Final product 14 1/4" Before After Instead of covering the logo with the hanger I flipped the...
1-15 of 20 Results
Top