Hey guys.
I'm having an issue with my 02 zx6r. The engine is cutting off when the clutch is released. The bike will start fine, respond well when throttle is given, and idle fine. When I put the bike in gear, the engine will run for as long as I hold the clutch, but when the clutch is...
I am new to super bikes, I bought an zx6r with 20k kms it was kept very good. I have using riding it from last 600 Kms and today When I came back from a ride I stopped my bike and then when I put it in 1st gear it turned off. I then started it again and same thing happened evey time, then I let...
Hi Peeps,
Bike: 2002 ZX6r (2003 plate though)
I had my bike serviced about 4 weeks ago from a recommended "good" private bike garage and ever since its idle has been off.. I've noticed it now cutting out when idling. Its almost as if its starving of fuel because its idle is sputtering at 500...
wassup guys, this is my first post and the first forum ive ever signed up for. I am so frustrated with this bike I bought a few days ago from a guy. So Im a first time rider, and have little knowledge about bikes overall(probably an overstatement). I bought a 2013 ZX6R no ABS from a person on...
SOLVED: 2005 ZX6r Bogging down, rough idle, stalling
Hello,
My 2005 ZX6r has recently started running awfully. The bike sat unused for a long time before I purchased it (4 years ago).
https://www.youtube.com/watch?v=MLY7ytY1eCQ
Symptoms are:
- Rough and sporadic idle
- Stalling when cold...
I need to pick your brains ppl. My track bike (09), when the throttle is applied, for example I'm in a hard turn braking to the apex and roll on throttle, it will engage, then stall then re-engage causing a disturbance and unsettling the bike. I disconnected the PCV quickshifter, didn't help...
UGGGG.....Hi guys, lifetime GSXR guy, literally bought my first Kawi 3 days ago. Beautiful bike, probably the nicest feeling bike i've ever gotten to ride. The intput, agility, nimbleness and aggressiveness are...WOW... but THIS!!!!!
here is a brief summary of my experience thus far on the 05...
I am new to riding and have been out only a handful of times. Have never kiiled it by letting off the clutch too fast. But today, its super nice out so I went out for a ride. It seems to run between 180-208 for temp.. Sound normal?? But my main issue only happened three times... When coming to...
My 636 is an 05, just bought had 8000 miles on it runs good. Only issue im having is at start up when shes been sitting for a few hours. Ill hit the switch she will fire up and then idle rough for a few minutes if I hit the throttle after I startup it will start to rev maybe to 2500 and stall...
My 06 zx6rr will start up fine. Rev to 2k but a second later itll drop to about 1k and will almost stall until its warmed up. If i kill it then try to restart it I'll have a hard time. It'll run very weak and eventually stall. This is my first fuel injected bike. Shouldn't the revs be higher...
Hey everyone!
New to this site, I just bought a 2004 zx6r it has 22 000 kms (13000ish miles)
I'm loving it so far, but I've encountered a problem. Sometimes when I want to slow down or stop the bike, it stalls. Basicly I just release the throttle, pull in the clutch and the bike just...
Hey guys/gals,
So I purchased my 03 ZX6R about 2-3 months ago. Buying the bike I knew it needed a valve adjustment as they were extremely loud. Plus the bike (at the time) had 20k miles and when I asked the owner about maintenance all I got was "I did oil changes every 3k".
So after saving...
Hey guys, need a little input...
I browsed the topics briefly but didn't notice anything exactly like the issue I'm having, so forgive me if this topic has been beaten to death previously.
I'm on an '07 and have had a history of electrical problems with it thanks to the former owner who didn't...