Kawasaki Ninja ZX-6R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-17 of 35 Results
  1. Member Classifieds
    I'm selling a PCV that was taken off my 2019 ZX6R. Ready to ship! Dynojet Power Commander V Kawasaki ZX6R/ZX636 2013-2020 SKU: 933635 $399.99
    $200 USD
  2. Member Classifieds
    I am selling a Power Commander V, Auto Tune and Servo Buddy for Kawasaki ZX6R years 2013 - 2020. I bought everything brand new in 2019 and had it on my 2019 ZX6R. Recently, I uninstalled it from my bike and it's ready for someone else to have fun with. I have the receipt for all items so if you...
    $500 USD
  3. Mechanical and Technical
    Hey all, I made a conversion file to create Woolich racing maps based on Power Commander 5 data. This was made for a 2019 ZX-6R 636, so I can't confirm that all the values will be the same for other years. Instructions are on the first sheet. Hopefully this helps someone out. The site won't let...
  4. Mechanical and Technical
    Is it normal for slip ons to radically reduce low end torque? I've seen no mention of this occurring from people who've gotten one. I've heard it losing a small ammount in the low end but no one seems to mention this degree of loss. Does it need a fuel map, tune , or a power commander? Thanks!
  5. The ZX6R
    Hello I need help! I have a 2014 that has two problems that are driving me crazy. Can anyone help? Prob 1. Bike stutters in low RPM when rolling on the throttle in 1st and 2nd gear. Its an aggressive stutter until you get above 4000 RPM. This isn't do to letting the clutch out to quick and...
  6. Mechanical and Technical
    Hello all. I just came into ownership of a 2005 Ninja 636. I would like to add a Power Commander to it but am unsure which make/model I purchase. Will someone please help me? I do not understand the correct one (PC1, 2, 3, 4, etc.) or anything about them really. Thank you in advance! - Nathan
  7. Mechanical and Technical
    Got an interesting one here... Just bought 03 zx6rr with power commander. From cold start, with choke all the way up, i still need to hold the throttle til it warms up. Once it warms up, and i turn off choke, rpms drop to about 700. I adjusted idle speed screw with bike warmed up, choke off...
  8. The ZX6R
    Hey Guys, Well ive had my bike for about 3 months now. Riding as much as possible with the weather permitting. I have an 04 636 and it came with the power commander. I'm not sure what exactly this is but after some research it sounds just like a tuner. correct me if am wrong of course. Didnt...
  9. Mechanical and Technical
    Hi Everyone! So i tend to work on my bike on my own. This past weekend i installed a K&N filter and a power commander V for my 2013 zx6r.... Bike sounds great, i also dropped the CAT while i was there :) I need to get it tuned, but im having no such luck with a company or two.... they must...
  10. The Build Thread
    2014 ZX6-R 636 ABS Build ABS Model Mods: Ohlins Steering Damper Yoshimura Frame Sliders HID 6000k Hi/Lo Beam slim ballest Lo-Jack Security System Scorpio i9000 keyless Alarm system LED Slim rear turn signals with LED relay flasher Fender eliminator kit with LED LP light Bridgestone S20R Dual...
  11. The ZX6R
    So my question here is for the people who have had their bike tuned on the dyno with a fuel controller (Power commander or Bazzaz) and people who've used the auto tune from one of the two. From what I've heard the auto tune is good and will be fine, but to get really accurate a dyno tune is...
  12. Mechanical and Technical
    What's up guys? I did a search and didn't come up with anything conclusive. I have a 2008 ZX6R with 32K miles. I'm running a Two Brothers Slip-on and a K&N Air filter (which I just cleaned about a week and a half ago). Just this past weekend I installed a Power Commander 5 (because I won a free...
  13. New Member Introductions
    Hey what's up everyone! My name is Dennis...new to forum but def not new to riding. been lingering around here for about a month just reading and observing. Starting riding in 2006 when I bought my first bike a 2006 636 with zero miles off the lot. I was new and stupid and learned my lesson real...
  14. Motorcycle Talk
    Just bought an 08 ZX6R, I went from a gsxr and noticed that the ZX6R lacks power compared to the gsxr. Was wondering if a power commander was a good idea to get? And how much torque, if any would it add? And any other info on a power commander that you'd like to share cause I know little to...
  15. The ZX6R
    My bike is a 03 zx6r B1h It has had this problem for about 6 months now and I can't understand why. I have owned the bike for 5 years and it have always been perfect. Basically, when the bike is cold, any temperature below 70 degrees (ish), and in any gear. As soon as you open up the throttle...
  16. Mechanical and Technical
    Hey guys I have a 2005 636 with only a K&N Air Filter and Leo Vince Exhaust modded on it performance wise. I was wondering if anyone has used a power commander and what their opinion of it was?
  17. Mechanical and Technical
    Hey all. Looking I to a power commander for my 2003 zx636. I am unsure on which part number fits this bike. There is a 207-410 and a 207-411. I don't want to purchase the wrong unit, as the plugs are different. This bike is not an RR. Anyone have one that they can tell me which part number I...
1-17 of 35 Results
Top