Kawasaki Ninja ZX-6R Forum banner

issues

  1. Mechanical and Technical
    Hi everyone, I am really hoping someone can help me out here, maybe if you’ve encountered the same problem? I have a 2013 zx6r and out of no where the bike has been dying while riding, I can’t call it stalling because it’s not a stall, it’s happened while riding in town and on the highway. The...
  2. The ZX6R
    I bought 06 ZX6R last year that came with ~20K miles. I have not done much work on it except for replacing some plastic parts I damaged when lowsided on track days. My thoughts were the bike was not worth expensive upgrades, still I paid a pro shop to rebuilt forks and shock, installed ohlins...
  3. Mechanical and Technical
    '13 Morimoto HID Wiring Issues Alright guys, I've searched pretty much everywhere and for some reason, info on '13 636's for wiring and anything else seems to be severely lacking. Just bought a Morimoto HID kit and I can't seem to get it wired up. Definitely not my first wiring or headlight job...
  4. The ZX6R
    Ok, so I'm having some issues with my bike and ya been pissing me off (sorry I've lost my patience). I have a 2007 ninja zx6r, and all of a sudden one morning about 2 weeks ago I got on it and noticed that when I started he bike the idle was fluctuating (from about 1000-1400 rpm) and when I...
  5. Mechanical and Technical
    okay so i was riding yesterday on the freeway, i dropped down to 5th to get around someone, gave it some gas and it sounded like my bike transformed into a dirtbike. FI light came on, i got it off the freeway and parked. I put it in to dealer mode 1 and got a code of 54 which is coil pack #4...
  6. Mechanical and Technical
    Hi all :) hopefull someone can give me some info about an issue im having. Ive got a G2 zx6r which at idle seems to jump, not alot but bumps from about 1300 to 1500rmp and throttle under load bogs down low to mid range revs. Going from 2nd to 3rd when pulling on throttle losses power and...
  7. Mechanical and Technical
    Since day one of buying this bike new I've had over heating issues and the dealer always dismissed them. After other substantial events relate to the dealer I'm now starting to see brown foam in the coolant reservoir. On a possible related side note there are also blue and pink paint pen...
  8. Mechanical and Technical
    I notice here lately my bike will accelerate fine in first but once I shift it damn near fall on its face will not give any power until I get below 8k or shift but it gets worse each gear I cannot accelerate to 7.5k and down .5k each gear past any sudjestions for helping me get my girl running...
  9. Mechanical and Technical
    Hi all This is my first post, so I do apologise for the forwardness of just signing up and asking questions! I recently bought a 2nd hand ZX6R (01) -- and loving every moment of it! -- However I had a bit of a scare within the first few days of riding the bike, when one of the four break pads...
  10. New Member Introductions
    I've owned my 2003 zx6r for a little over a month now, and I've been having a heat issue near my right foot/ankle area, almost gets so hot that it feels as if my foot is on fire at some points. It only occurs when riding at slow speeds (about <55 that i can feel it) but not when stopped. At...
  11. The ZX6R
    Thanks guys for the help! Admin can now close this post please.
  12. Mechanical and Technical
    Ive searched on here and other sites and cant really find the answer to my problem. Every once in a while when shifting from 1st to 2nd it used to make this popping/knock sound. Its starting to happen more often now, it only normally does it when im going over 35 in first and than go to shift...
  13. Mechanical and Technical
    So yesterday I tore the bike down and checked my valves and did some maintenance. Everything was good, put the bike back together and did a 45 or so mile ride after to get home from where I was. When I put the bike back together everything was smooth as usual and the cables were routed properly...
  14. Motorcycle Talk
    A while back I posted a thread about my 2003 Kawasaki Ninja ZX6R 636cc having a mechanical issue ( http://zx6r.com/mechanical-technical/20552-2003-zx6r-idle-issue-dies.html ) . The issue being, the bike idles improperly and dies on me when I'm not giving it some throttle/gas...
  15. Mechanical and Technical
    Please help! I have a 2003 Kawasaki Ninja ZX6R, if i'm riding my bike and the rpm's hit around 8000 to 9000, when I come to a stop and the rpm's go back down, the bike begins to idle funny and the rpm's begin to drop below 1000 until it dies out. I can keep it from dying by giving it some...
Top