Kawasaki Ninja ZX-6R Forum banner

idle issue

  1. Mechanical and Technical
    Hi guys, i own a 2008 zx6r since January, and a few rides ago i started to notice that when the bike is hot the idle is always on 2k ++ RPM. (Video URL: ) Is this a problem? If so, what can i do to solve this? Expensive? Thank you ! :smile
  2. Mechanical and Technical
    My 636 is an 05, just bought had 8000 miles on it runs good. Only issue im having is at start up when shes been sitting for a few hours. Ill hit the switch she will fire up and then idle rough for a few minutes if I hit the throttle after I startup it will start to rev maybe to 2500 and stall...
  3. Mechanical and Technical
    I had some issues with the bike running a little while back, give it throttle and it wouldn't go like it should, then it got to the point where it wouldn't even run. Replaced the fuel pump& filtef and ran like a champ. Untill recently. I was going out to my daughters moms house to spend some...
  4. The ZX6R
    Hey guys/gals, So I purchased my 03 ZX6R about 2-3 months ago. Buying the bike I knew it needed a valve adjustment as they were extremely loud. Plus the bike (at the time) had 20k miles and when I asked the owner about maintenance all I got was "I did oil changes every 3k". So after saving...
  5. Mechanical and Technical
    Okay so here's the deal, i have a 2000 zx6r i just purchased and i'm aware of some kinks that need to be worked out. So here's what the issue is. The bike starts up perfect during the day, in the am when it's a little cooler i'll choke it and still, starts up great. The temp goes up to about...
  6. Mechanical and Technical
    Okay I'm looking for fresh suggestions on how to fix my 03 ZX6R's idle/stalling issue. The idle still fluctuates and then eventually my bike will stall. Here's a link to an old thread explaining the issue in more detail. There is also a video you can watch if you haven't seen it before...
Top