Search Results for ‘help me’

H

Hi I have a 2016 ZX6R with less than 3kmi and I am now noticing that when I start the bike and let it run, the fuel tank will implode or cave in. Like there is too much vacuum inside it. The bike runs fine when it happens and the vapor hose is not clogged. The tank will go back to normal if the...

Hey all, I recently ripped apart the bike to do routine maintenance and discovered that the previous owner had wired the fuel pump in a weird way. The black and yellow wire is missing from the back of the male connector on the bike. In the wiring diagram, this looks like a ground wire. While...

Hi All, I bought a 2010 zx6r track bike a year ago. It was running great at the track, until the middle of the 2nd day when a valve broke and munged up the inside of the cylinder (see pics of piston and head). So I bought a 2012 motor with 500 miles on it, and my friend @ninjaman89...

Hi All I don't know if anyone can help but as i was removing the fairing from the tail of my C1H zx-6r this part fell off i have no idea where its from or what it does. I've attached the images I've taken. Now I've spent the last 2 hours looking at technical drawings of the bike and i can...

So recently my 99 ZX6R G2 drop and inlet valve so I've had to rebuild the engine. I have nearly finished the rebuild but i'm having an issue. I have power to the coil but no spark. I also have power to the starter motor but it's not turning over. It is grounded properly and isn't a faulty coil...

So in my infinite wisdom I forgot to tighten down one of the bolts on the fork after I put the axle back in when doing my tires tonight. I'm not sure what the hell happened to the other bolt, but needless to say it is gone and I need a new one asap. Does anyone know where I can buy/order new...

Doing some tidying up and I see this bolt missing. Not sure if something should be there? What it goes to? Or how it disappeared please help.

Long story short my voodoo slip on fell off my bike while riding. The clamp went with it too. Putting on my delkevic pipe and a OEM clamp and Gasket but the I cant find where the gasket fits into and the clamp doesn't cuff the pipe all the way fully screwed down. Now what? Its OEM so...

Changed the oil about two weeks ago used a k&n oil filter.... Just yesterday i noticed oil on my back tire when i came home. Stripped the bike down and its coming from the oil filter. The oil filter will not go ANY tighter the nut on the end of it is starting to round off now. Should i buy a...

I have a early production 2013 ZX6R that I bought used. When starting it cold it may take 2-4 attempts until the engine will start warming up instead of dropping rpms too low and stalling out. I have done a lot of research and this appears to be an ECU issue. I have found a good price on a 2015...

I recently adjusted my valve to be within factory spec. And after reassembly when I rev my bike on the downward rev it pauses at 3.5k rpm and slowly goes down from there. I don't think it has anything to do with the idle Bc I've adjusted that several times. Possibly the throttle cable? I've...

Hey guys, Ive been riding my 05 zx6r 636 the past few days and it has drastically lost power. First off, taking off from a stop, I have to rev the bike almost double the rpms than normal to keep from bogging out. Also, when going through second and third gear, when I twist the throttle to get...

Hey I just bought my self a bike and I mean to do maintenance on it my self like tires change, oil, oil filter and coolant. I just wanted to know if it was normal for my bike to reach up to the 200s idling as long as im cruising I stay at 180. and I need help on what coolant to use

Just wondering what this part is called. The right side one is scuffed from a previous owner and I want to see about replacement. Thanks in advance.

I just installed my new vortex rear sets and I love them! But the rear brake line is now to long and I think I need a shorter one. Just curious if anyone else has had this issue and what you did. Thanks :)

Okay, I was installing signal lights and fender eliminator on my 2013 zx6r, I have done this before, but this time there wasnt clear instructions. It is the signal lights that come with the 2 brothers slip on exhaust. Anyways, something has happened that my front or rear signal lights don't...

I have a black 2007 ZX6r The previous owner dropped the bike and broke the slider. Instead of getting it professionally done, and doing it with out knowing. the bolt is now impossible to retrieve :coocoo . Is there an alternative frame slider for the drivers left side that DOES NOT use the front...

bought a new (to me) 2000 zx6r about a month ago, so far i like it even though its a little bit older than my previous gsxr was, but heres the thing. one morning on my way to class i go to fire it up and nothin happens, lights are dim, starter makes one click and dash is blank, i figure oh well...