Kawasaki Ninja ZX-6R Forum banner

frame

  1. Mechanical and Technical
    I was going to write out the pro's and con's due to recent interest but there is already a very good article written at Life at Lean. Here it is: Are Crash Bungs Worth it? Pros & Cons of Crash Bungs and Which to Buy Crash bungs are specially designed stoppers that bolt onto the outside of...
  2. Mechanical and Technical
    Hi guys, I have a 2013 zx6r with 5000+ miles and I think I might got a slight problem :crying Background: I had frame sliders on until I low sided at 4500 miles, after the crash I bought the parts and a dealer fixed it. After the bike is up and running, I took the old sliders out, and didn't...
  3. Mechanical and Technical
    hello. so looking at buying a 2015 zx6r this week and the first thing i want to do is get sliders for the bike. i like the idea of race rails but from what i can tell it seems you have to cut the fairing for them..am i wrong? if you ill stick with no cut frame sliders. any thoughts and ideas...
  4. New Member Introductions
    Hi there ladies & gentlemen Im looking to buy a zx6r 09-12 frame and clean title. Prefer if you are in the GTA but we could still figure something out. if you have something just let me know. Thanks
  5. New Member Introductions
    Hi all, Hoping someone can help. I'm a new rider with an ZX636 C6F 05 plate. Recently got the bike and recently passed my test. Was thinking due to my inexperience that I'd get some crash protectors for the bike just in case. Does anyone know for my particular model if I can get any that...
  6. Mechanical and Technical
    so I picked up a 2010 zx6r the other day off auction. not too much damage, broken fairings, left clip on and rearset... small stuff. After pulling all the tail fairings I could see that the subframe is twisted counter clockwise a bit and bent to the right a bit as well. I was reading up about...
  7. The ZX6R
    I am in reno nevada, looking for a 07-08 zx6 frame with paper. I have a clean, straight frame, just lost the title and I cannot locate the previous owner. If you have one feel free to let me know. 775 384 4747 TIA. Jaime
  8. Mechanical and Technical
    Hey all. I had a question on a downed 2010 zx6r I am looking at bidding on. So far I have just looked at pictures of it (its right by my house so I plan on spending some time looking it over before I place any bids). Did some research and was wondering if there is a plastic cowl that covers the...
  9. The ZX6R
    Just picked up a brand new 2013 leftover zx6r. I read a lot of zx6r owners do sidestand / kickstand pivots, etc. with their bikes. You also see a lot of people sitting on their zx's while on stand. I have no need in doing stand spins or such where I live, but I'm concerned with the owners manual...
  10. Mechanical and Technical
    ok so hear is the thing i want to put a bigger engine in my 97 zx6r frame i have found a 99 zx9r but i am not sure if it can go in or what needs to be dun to make it fit i am not afraid of fabrication but i dont want to mess up in getting the motor and then mot being able to make it work and on...
  11. New Member Introductions
    My Name is Dale. Ive been riding for 35 or so years. I just sold my last cruiser. I am never going to buy another. That said, I am starting an undo. Guy though he knew how to fix bikes. Choke cable placement. Not sure if it is right. My question is: What is the proper placement/location...
  12. Motorcycle Talk
    Ok so I'm new to the world of bikes I got a salvage 03 zx636 frame totaled and I'm wondering what frames will fit the motor with the least amount of adjusting and still look badass. Any advice will help thank you
  13. The ZX6R
    Im looking at a a few frames for my 03 zx636, Just wondering if 05 frame would work it looks the same to me. Any help would be appricated!
  14. Want to Buy
    I need a frame that will fit a 04 ZX636. I have a salvage bike but it is a pain going through inspection in CT. Im hoping to get a frame with clean paperwork so then I can just get it inspected and be good to go. Does anyone have a frame with the title? Let me know, Thanks
  15. Stunting
    hi guys first post here so here goes. i got myself a 99 zx6r the g2 i think. i converted her to a naked and got fome moto x bars. ive now moved house and there's not much well any corners for 500km so my not getting to go riding much so i started stunting and well realized im going to need...
  16. Mechanical and Technical
    I want no cut ones but does any one know which ones are better out of these two are better? or any other suggestions. LSL Kawasaki Crash Pad Frame Slider Kit Vortex V3 Frame Slider Kit (No Body Modification Required) for ZX6R/RR 03-04 - Frame Sliders & Bar Ends - Street Parts -...
  17. Want to Buy
    I am searching for a 0-04 frame and under triple tree.:idea:
  18. Motorcycle Talk
    ive seen several pictures of 00-02 6R's with frame sliders. Do you have to cut a hole for them to fit or is it going through one of the fairing bolts? does anyone have a pair they would recommend? thanks!
  19. Mechanical and Technical
    I am looking to make a set of frame sliders for my 2004 zx6r since I have access to a lathe at work. I was thinkin all aluminum or aluminum nylon mix. What I am wondering is if anyone has any dimensions on the section that would bolt up to the frame? It looks really tight and I am wondering how...
  20. Want to Buy
    im looking to buy a 08 zx6r frame with title. i prefer a clean title but beggers cant be choosers.
Top