Kawasaki Ninja ZX-6R Forum banner

frame sliders

  1. Mechanical and Technical
    Picked up a non-ABS 2019 636 and loving it. The old owner gave me a set of PA2 Shogun frame sliders, but when I went to install, seems like the bolt for the left side is too long. Anyone else had this issue?
  2. The ZX6R
    I've got a 2019 ZX6R and I was going to install the frame sliders myself but I can't find the main engine bolt torque specs anywhere and I don't have the $75 for the service manual. what I have found has varied, but I've been seeing like 32 ft lbs for the bolts. Is this correct?
  3. The ZX6R
    I've heard a lot of reports of people cracking their frame when crashing with the '09-'16 ZX6Rs. I have a set of Woodcraft sliders I'm debating whether or not to install onto my '13. The purpose of whatever bike protection I put on is to protect the frame/engine. I know fairings are most likely...
  4. Mechanical and Technical
    I just got a set of yoshi frame sliders for my '15 frame sliders, should i use loctie when mounting them?
  5. Mechanical and Technical
    Looking to purchase frame sliders for my zx6r any suggestions and are they hard to install by yourself??
  6. The ZX6R
    Hey all, I need to get some frame sliders and spools for my 2007 ZX6R. I tried a bundle off amazon once but it didn't come with all parts. :( What's the best place (website, store, etc) to get frame sliders and spools for my bike or what's the best brand of them? Any help would be greatful...
  7. Mechanical and Technical
    I have a black 2007 ZX6r The previous owner dropped the bike and broke the slider. Instead of getting it professionally done, and doing it with out knowing. the bolt is now impossible to retrieve :coocoo . Is there an alternative frame slider for the drivers left side that DOES NOT use the front...
  8. Mechanical and Technical
    I don't know if there is a similar posting like this or not, but I have a '13 zx6r and am considering either frame sliders or an engine guard. I was wondering what other peoples opinions are on which ones are the best as far as guard vs slider, brands, blah blah blah.... And discuss.
  9. The ZX6R
    Im looking to add a little bit of class to my bike. I'm looking for the best NO CUT FRAME SLIDERS for my 2012 ZX6R. Any suggestions will gladly help.
  10. Mechanical and Technical
    Ok, so I have a few questions. I have a 1996 ZX6F (ZX6R), and I ran into a problem trying to take out my carburetor. The bolts that hold it in place (I think) are very tight and don't budge, and I could only actually put my allen wrench on one of them. the rest are very hard to reach and very...
  11. Mechanical and Technical
    previous owner screwed me! for some dumbass reason i can not install frame sliders on my bike. i have tried two different kinds of frame sliders by two different manufacturers. no luck. it looks like they sawed off or bored out the old placement so now nothing fits....WHAT CAN I DO?
  12. Mechanical and Technical
    I am looking to make a set of frame sliders for my 2004 zx6r since I have access to a lathe at work. I was thinkin all aluminum or aluminum nylon mix. What I am wondering is if anyone has any dimensions on the section that would bolt up to the frame? It looks really tight and I am wondering how...
Top