Kawasaki Ninja ZX-6R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 16 Results
  1. Mechanical and Technical
    I need to change my fork oil on my 2015 zx6 with stock showa forks (rebuilt 7k miles ago for my weight, riding style, etc). The service manual makes it seem complicated. Saying I need to remove the piston rod assembly and use a rod guide case wrench. Can I simply loosen the top plug and leave...
  2. The ZX6R
    Okay so I bought a 1998 zx6r is very rough condition took fairings off and frame ended up being cracked. Bought a new frame off a 06 zzr600 everything fit like a glove but now my bike is sitting 5inches higher, my forks also seem to be at a weird angle I’m at a loss every thing was removed and...
  3. Member Classifieds
    I have a full 2004 setup minus the wheel and triple tree. All are used and have minor wear, but pretty nice. Brakes and forks are the gold. the axle and spacers are brand new never used from OEM kawi. Was looking for $450 + shipping cost for the whole lot!
  4. Mechanical and Technical
    Hey, got a few questions real quick that I haven't been able to find the answer to, going to buy a bike tomorrow and I already check out the bike prior, almost 23,000 miles, Kawasaki ZX6R, 2007 for $3k 1.) Ive seen videos talking about the front forks on a motorcycle that should be clean, now...
  5. Want to Buy
    Looking for a set of Forks for a 2012 Zx6r. Any one have any or can lead me in the right direction it would be highly appreciated. Thank You!
  6. Mechanical and Technical
    Anyone know where I can pick up OEM fork seals for 09+ Showa BP forks? Also, if anyone has any recommendations on fork seals that are just as good as OEM, that would be much appreciated! Thanks:)
  7. Mechanical and Technical
    Hi i have a 2007 ZX6R P7F. I was looking for some advice on setting for the suspension i am 80kg i set up according to the manual which i supposed to be 68kg rider and it is rock solid. wondered if someone can tell me what set up they use to soften the suspension right up. thanks in advance for...
  8. Want to Buy
    As the title says I'm looking for a straight set of forks for an '06 636. I want a set in good condition or just the inner chrome sleeve. Mine have surface rust and pits and keep tearing up my seals. Thanks
  9. Mechanical and Technical
    hi i am pretty sure i know the answer to this question but wanted to be sure, i have a set of 04 zx6r forks and was looking at an 05-06 triple clamp to mount them in will this work. all help much appreciated stuart
  10. Racing
    So this weekend I will be installing my new forks! Penske 20mm internals, 9.5KG/mm springs for my weight, all fresh seals, and fresh Maxima 7W fork oil. Considering my OEM forks have 20k miles on them and leak, this should be HUGE. Not to mention, we all know the progressive springs and...
  11. East Coast
    Hi all, I ordered forks from a local salvage yard from a repo'd 2007 zx6r I thought great! I can upgrade! But its proving more of a money hassle then I'm ready for.. so they're up for sale or trade for 1998/99 zx6r forks or any that would be a more direct swap, they look amazing but its more...
  12. Mechanical and Technical
    Our 1990 ZX6R is not engaging 4th gear. Makes rattling noises, so we just go from 3rd to 5th. I have been told this is a fork issue, so I am looking into rebuilding the transmission. I'd like to pick up some nice used forks. I presume any of the 1990-93 will work, but anyone know if other years...
  13. Mechanical and Technical
    Okay. So the forks I bought had the lower parts TiN coated. Does anyone know how the TiN is actually applied to the fork? What kind of deposition is used? Gas? Direct? ... or is it coated using a bath similar to chrome? Titanium + Nitrogen = TiN ... so it must be gas deposition ya? My second...
1-13 of 16 Results
Top