Kawasaki Ninja ZX-6R Forum banner
1-10 of 11 Results
  1. Mechanical and Technical
    Hi guys, On racetech’s website I’m seeing fork springs available only up to the 2018 model. Those 2013-2018 springs should work just fine for 2019-2021 correct? I believe all those years have the same big piston separate function forks. Just looking for confirmation, or if there is a difference...
  2. Gear
    I have find this photo talking about OHLINS FORK, anyone know that the parts number/MODEL number with this FORK?
  3. Classifieds
    I'm selling a Showa fork that was removed from a 2011 ZX6R with only 1.300 miles. Fork comes with Ohlins steering dumpener, Nissin calipers, brake pads, clutch lever and cable, etc... it fit in all zx6r since 2006 thru 2012. It's a great upgrade for those zx6r since 2006 improving handling and...
  4. Mechanical and Technical
    So in my infinite wisdom I forgot to tighten down one of the bolts on the fork after I put the axle back in when doing my tires tonight. I'm not sure what the hell happened to the other bolt, but needless to say it is gone and I need a new one asap. Does anyone know where I can buy/order new...
  5. Mechanical and Technical
    19,000 miles on my 2003 ZX636 and I notice a slight chattering noise from the front end on even little bumps. Could it maybe be just low on fork oil? I have not yet actually checked or changed the fork oil since I got it last year. Any suggestions?
  6. Mechanical and Technical
    Hey people's, I just had my fork seals and oil changed because both sides were leaking dues to cracked seals. Now it had been two weeks and the right hand fork is leaking. As in when I push down to compress the fork and then release, there is visible oil residue on the stanchion(far more oil...
  7. The ZX6R
    Could some body help me please I have a zx6 j1 model and crashed it I've bought second hand forks on e bay the fella said thay were off the same model the problem is that my old ones are about 1/2 an inch longer that is the stantion would this make a different because the diameter is the same...
  8. Mechanical and Technical
    so like it says, I crashed... the bike managed to slide upside down on the left fork adjustment cap. i bought a new one on ebay and recieved it today but what needs to be done to change out the cap?
  9. Mechanical and Technical
    Hello I am new to this forum. I acquired a 2006 ZX6R with 5k miles on it from a guy who dropped it in his driveway. I wanted to custom paint whatever I bought anyway so I didn't see the scuffs as an issue. From the drop though it appears a bolt located under the top portion of the triple tree...
  10. Mechanical and Technical
    hello, i have a 2005 zx6r. Recently i found a clicking noise coming from the front fork area when i put it on the side stand and pump the handlbars, or when i go bumps, or braking. I went through lot of threads and found some ppl taking about tightening the engine mounting bolts. Till now i...
1-10 of 11 Results