fi light

I have a 2003 ZX6R and had a starting/electrical issue. I parked the bike for three days and it was fine before and for an hour when I started riding. I turned the bike off for a break and when I went to start it the bike acted like the battery died so I jumped it and started fine, went to ride...

Hoping to get some help with a strange problem. I just picked up a 04 zx6r with 9k miles on it. Recently put in a new battery, changed oil, spark plugs, recharged the K&N air filter, and put the recommended amount of sea foam in some new gas(cause the bike was sitting for months with the...

Hey guys, I'm brand new to the zx6r forum and made this account because i have a problem that i don't know how to fix. So i bought my 2003 zx6r with about 32,000 miles on it and the FI light is on. When i turn the bike on, it makes the buzzing sound right underneath the gas tank like all zx6rs...

So gents, I finished my valve adjustment. Thing is while I was torquing things down, according to the service manual, first to 52 in/lbs, so I set my torque wrench and went slow according to the directions. Well I snapped 1 and thought it was a bad bolt, then 2 and I have no idea why I kept...

Just picked up an 05 636 and my FI light is on. the mechanic who looked at it (not a Kawi dealer) thinks it's a fuel mapping issue and could be caused from after market micron exhaust. He suggested having it plugged in to a computer at a Kawi dealer. I also have the stock exhaust that the guy...

Hey brothers. I have a 2012 ZX6 and recently added some upgrades but keep throwing an FI light at high rpms Upgrades done: PCV Driven Smog Block Off Plates KN Air Filter The Driven kit didn't include a plug like Ivan's to close the circuit of the original smog plug. I stripped the wire back...

2006 636 w/ 19xxx miles Two Bros slip on Servo Buddy Jumper Mod So this weekend I finally got around to plugging in the servo buddy I bought from a member on this forum. Started the bike, and the FI light was off, awesome. Quickly gave her a spin around the block a few times, it stayed off...

06 636 with Two Bros slip on and exhaust servo box removed. My question is this. I just ordered a "servo buddy" that another member on this forum owns and plan to install it today. If I were to do the jumper mod, in addition to unlocking the Euro mapping and freeing up a couple of ponies up...

i have replaced everything i could think of i have replaced the crank sensor the cam sensor battery the stator and the ecu i bought the bike as a project it has been layed down kinda hard the vehicle down sensor is good after testing it dont know where else to look, aftrer replacing the ecu and...

i have an 06 636 with those amazing dual carbon fiber exhaust. only ten k on it and sometimes it wont start. the engine keeps turning but nothing my buddy said it has something to do with the fi light. o yea and how do i put my bike as my profile picture? ninja love -. -

Hey guys, Just bought a 05 Zx6r model C1H off a close buddy of mine. Noticed that occasionally the FI light will pop on, whenever i give it a rev it goes away and will sometimes pop back on. Any idea what this could be? i believe its the exhaust Butterfly valve, ran error code 63 in its past so...