Kawasaki Ninja ZX-6R Forum banner


  1. 2010 zx10r headers on 2011 zx6r?

    Mechanical and Technical
    Hey guys, It’s my first post here so I’m not sure if this is in the right section, but I saw someone say that the zx6r and 10r headers are interchangeable for 2009-2012. but when Looking at the pictures of the systems they dont look the same. If anyone has tried fitting 2009-2012 zx10 headers...
  2. New (will consider used) Full System Akra exhaust for 2016 Ninja Zx6r. Needs to be In CALIFORNIA

    Want to Buy
    Having so much trouble trying to get an aftermarket exhaust shipped to me here from outside California. Anyone in California, preferably close to San Jose that has a full system Akra exhaust for sale?
  3. Quest for inexpensive MotoGP sound

    Mechanical and Technical
    Hi everyone, longtime lurker, first time poster. As it says in the title, this is a thread for my budget pursuit of something a little better sounding on my 2012 ZX-6R. How I got here: Two years ago, and right after I traded for my 2012, I picked up a Delkevic tri oval slip on and proceeded to...
  4. Compatible fitment for zx636r 2013/2014

    The ZX6R
    Hi guys, looking to see what other people actually have done I have a 13/14 636 with a r77 slip on and standard manifold, looking to do the mid/pine/link pipe and De-cat however, Yoshimura does not do full systems to aus anymore... Looking for a preferably aus retail or verified fitting mid...
  5. ECU fuse too hot?

    The ZX6R
    So I just got an 05 636 and had a shop look over everything and they said all was fine. So I went for a ride today and after about 1.5 - 2 hours she started to big down pretty bad and it throws a code. I let it sit for a little and it cooled down and rode fine. Do I need to heat shield under the...
  6. Exhaust Question

    Mechanical and Technical
    Let me preface this by saying, i am not overly inclined, mechanically so this may sound like a dumb question but here goes.. if i have an exhaust leak back closer to the end of the exhaust system, specifically by the muffler/pre-muffler, how bad is it? for context, on my 2014 zx6r i recently...
  7. 2007 ZX-6R Melted plastic near exhaust

    Mechanical and Technical
    Just bought a 2007 ZX6R from a buddy, and when he had the chain replaced by the dealership, they did it wrong and it ended up flying off doin 100mph. The bike was fine, for the most part, but when it came off the chain gouged a decent sized hole in the plastic under the rear seat. Today I took...
  8. Shorty exhaust for 03/04 zx6r thats not a m4

    The ZX6R
    ANYONE EVER TRIED THIS ONE? https://www.ebay.com/itm/2003-2004-Kawasaki-ZX636-Ninja-ZX6R-slip-on-RLS-Exhaust-Assassin-Series-black/132784423220?hash=item1eea918134:g:VpsAAOSw2iNZYv62
  9. 01 ZX6r D&D Header cracked at tube to flange mate (repair suggestions)

    Mechanical and Technical
    What's up guys? My 01 has sat for about 8 years now and I am going over it from front to back. It has a D&D full system on it and one of the header tubes is cracked at the spot where the tube meets the flange on the motor side. What is the simplest means of repairing this? I can access the...
  10. Suspension bolt removing problem on zx6r, 2003

    Mechanical and Technical
    Hello, I want to maintain suspension bearings but I have one bolt which is interfering with exhaust pipe. Please see attached pictures (the bolt is marked with red arrow). How to remove the bolt ? Maybe I need just cut it and put the new bolt ? To remove all exhaust pipe looks like to much job...
  11. For Sale 03/04 Hindle exhaust (high mount)

    took it off my zx6r had the full system but sold the headers. exhaust can and pipe is left and looking for possible trade for some track gear? or shoot an offer if interested $$
  12. Link Pipe HELP!!!!

    Mechanical and Technical
    I have a ZX6R C1h (55 plate) and a stock exhaust. Somebody gave me a scorpion can to fit my bike but he didn't have the link pipe. I have looked for days on days for a supplier for just the link pipe. I keep getting told Scorpion dont sell them by themselves and no other retailer will either. I...
  13. Leo Vince Help/for sale

    Want to Buy
    Hey all, hope this is being posted in the right place. I just picked up a 207 ZX6R (my dream bike) and it came with what I thought was a simple Leo Vince slip on but after looking into it, it was more complex than I had thought. Basically I only have the exhaust piece itself where I still...
  14. *HELP* White smoke coming out of my exhaust!

    Mechanical and Technical
    Hey guys, So I recently purchased a 2005 Kawasaki ZX636R with 18,000kms. I bought it before winter and rode it 3 times, then put it away for storage for 3 months. I went to start it up again and white smoke started coming out of my exhaust. When it started, no smoke came out until 30 seconds to...
  15. Slip on help!

    Mechanical and Technical
    Hi all, Did search for my problem before posting, so sorry if it's duplicated, Anyway, I've got a '14 zx6r and have a slip on can... But no pipe to link it to the pre chamber. A local fabricator wants £100 to make one up! I've searched the Web but can't find just that pipe on its own. (the...
  16. Zx6r used exhaust for 2008 models?

    United Kingdom
    Hi all, New to this forum! Wondering where is best to look for a second hand exhaust slip on for a 2008 p8f zx6r?? Cannot find a great deal on ebay
  17. OEM Headers to Full System Conversion 07 ZX-6R | Need Help + Learn How to Yourself!

    Mechanical and Technical
    Area Reserved for Upcoming Tutorial
  18. Aftermarket exhaust 05 ch1

    The ZX6R
    anybody have a 2005 zx6r exhaust for sale Hi all does anybody have an aftermarket exhaust for a 2005 zx6 c1h on a budget
  19. Exhaust help

    Mechanical and Technical
    Long story short my voodoo slip on fell off my bike while riding. The clamp went with it too. Putting on my delkevic pipe and a OEM clamp and Gasket but the I cant find where the gasket fits into and the clamp doesn't cuff the pipe all the way fully screwed down. Now what? Its OEM so...