Kawasaki Ninja ZX-6R Forum banner
carburetor
1-6 of 6 Results
  1. Mechanical and Technical
    Hey All :) Looking for advice on my 2000 zx6r please. I've been having vacuum leak troubles with the carb ever since a rebuild last year. Today I discovered the tie down bolts for 2 of the 4 carb manifold clamps weren't tight. Unfortunately I bought the bike with all 4 bolts stripped, so I...
  2. Mechanical and Technical
    First post here! Alright so I bought this 1995 ZX6R and decided to do the carbs clean by myself. I've never done anything like that before, but I found plenty of help on YouTube. I've taken the carbs out no problem, then took them apart to do a clean. Everything was intact in there, but the...
  3. Mechanical and Technical
    Hey guys, I'm stuck. I can't seem to get at the "screws" the are holding the carbs in place. Anyone have any advice? I have no idea what type of bolts these things are. They don't have anything for a screw driver or wrench to grip onto. Also I've already dismantled the tank, seat, air box...
  4. Mechanical and Technical
    Hey I have a 2000 zx6r and I can't get the carb off I got the front hex bolts but cannot reach the second set of bolts out is there a special hex wrench I can get or what? Any help would be great
  5. Mechanical and Technical
    I bought an old 94 Ninja 600R. Not sure if it is A,B or C. Bought it not running 300$ to fix up for a friend. Got it running and even rode it around town several times. Decided it was functioning and bought a new front tire. After putting the new tire on the bike started doing this thing where...
  6. Mechanical and Technical
    The turn signal switch on my zx6r has started to wear out u beleive. it only activates the turn signals about 20% of the time now. Does anyone know how to repair/Replace/ fix it? Do I buy a new part? What's the part called? as always all help Is appreciated greatly. Thanks!
1-6 of 6 Results
Top