Kawasaki Ninja ZX-6R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Mechanical and Technical
    Hi all :) hopefull someone can give me some info about an issue im having. Ive got a G2 zx6r which at idle seems to jump, not alot but bumps from about 1300 to 1500rmp and throttle under load bogs down low to mid range revs. Going from 2nd to 3rd when pulling on throttle losses power and...
  2. Mechanical and Technical
    God, when it rains it pours. Changed the clutch, job seemed to go well. After a mishap with the fuel things seemed to be running fine but today I decided to take a longer more spirited ride. Long story short. Bike wont go past 50 MPH. Bike revs up fine to about 6000 and just seems to stay...
  3. Mechanical and Technical
    So here's my issue, I have a carbeurated 2002 ZX600J. When I bought it (used) it worked fine but had definitely been tweaked for racing. I drove it from Halifax to Ontario (1100KM) in a day, and when I left to come back home the bike quit. I've brought it to 3 shops and every time they thought...
  4. Mechanical and Technical
    Hello, I am just looking for a bit of help to diagnose a problem I am having with my J1. The problem is that the engine seems to getting intermittent power. What I mean by that is that say holding the throttle open and going at constant speed and constant revs she starts to rev in little...
  5. Mechanical and Technical
    Ok, so I have a few questions. I have a 1996 ZX6F (ZX6R), and I ran into a problem trying to take out my carburetor. The bolts that hold it in place (I think) are very tight and don't budge, and I could only actually put my allen wrench on one of them. the rest are very hard to reach and very...
  6. Mechanical and Technical
    hi guys. I recently got my faithful old F1 back on the road after a long stint in the shed. carbs were a mess so I stripped and cleaned them then had a shop balance and tune them. It's running an aftermarket can (not sure on brand) and I fitted a K&N filter. I asked the mech to jet it suit and...
  7. Mechanical and Technical
    Okay so here's the deal, i have a 2000 zx6r i just purchased and i'm aware of some kinks that need to be worked out. So here's what the issue is. The bike starts up perfect during the day, in the am when it's a little cooler i'll choke it and still, starts up great. The temp goes up to about...
  8. Mechanical and Technical
    Hi all I got this bike a month ago and was having a problem when coming to a stop the revs will take long to go down to idle, i thought a carb cleaning and sync + new spark plugs will fix it but it did not,it is less now but still happens once in a while mostly in the afternoon when it gets...
  9. Mechanical and Technical
    i have a 99 zx6r. the bike runs when its going. occasionally when stopped, ill pull in the clutch lever to start going and the bike will shut off. any ideas as to why this is happening? i had a jet kit installed prior and i upgraded the pipe to a performace pipe. ive also had the carbs clean.
1-9 of 9 Results
Top