Kawasaki Ninja ZX-6R Forum banner

camshaft

  1. Mechanical and Technical
    Would I need to take the engine off in order to reset the timing on the cam chain? I lost the timing on a ZX6R during a valve adjustment when I took off the camshaft cover which took the exhaust camshaft with it. As a result, the chain came off the sprocket before I could make timing marks on...
  2. Mechanical and Technical
    Hello, here's a strange one; I stripped the top of the engine to check valve clearances & of course some needed adjusting so out came the cams. The timing mark was set at T1.4 & before taking them out I carefully marked the chain & sprocket wheels with paint so as to get them back in exactly as...
  3. Mechanical and Technical
    Hi there I have recently stripped my motor to replace a bearing on the input transmission shaft that let go. During this the camshaft position sensor got damaged and now when I tried to fire the bike up it will not start and the fi light flashes. It shows code 23 for the above sensor so I have...
Top