Kawasaki Ninja ZX-6R Forum banner

caliper

  1. Mechanical and Technical
    Been leaking for the past I'd say 6 months all because I can't remove these bolts! Sick of it! Took the other side off just fine these are the problem. Completely stripped. Went to buy a set of bolt extractor bits and that didn't work either. I've tried hammering the next biggest size in there...
  2. Guides
    Things you will most likely need: Socket Set w/ ratchet Catch Can Allen Head Sockets/Keys Brake Fluid Your Model Caliper Rebuild Kit Knife Small Flat Head Screwdriver Needle Nose Pliers Brake Cleaner Electrical Tape Rags Over time brake dust and other mineral deposits get collected on the...
  3. Mechanical and Technical
    So I've had this annoying clicking whenever I'd begin to accelerate coming from the rear brake caliper. Upon closer inspection looks like it's being caused by the slightest of play or "wiggle" in the caliper slide pins as shown in the pic. Wondering if this is normal or do I have to replace the...
  4. Mechanical and Technical
    Okay so yesterday I noticed that there looked like there was brake fluid on my left brake caliper. The fluid isn't coming from the hoses, and i bled the brakes & tightened up the bolts as well. I rode the bike for about half an hour last night, and this morning I noticed the fluid was there...
  5. Mechanical and Technical
    hi i have a b1h 03 ninja. my problem is, i was bleeding my front brakes and the nipple cross threaded in the caliper so the thread is fooked. the hole has been re-threaded to m8 (m7 before) the nipple i have is m8 but wont seal so the nipple is always open. dous anyone know of a nipple size m8...
  6. Mechanical and Technical
    Okay, I changed my back tire last night. When I put everything back on, I notice that my rear brake pads are in contact with the disc. In fact so tight that I cant even get the bike to move backwards in neutral. The bike will drive forward with a little throttle. I asked my buddy, and he told...
  7. The ZX6R
    This started off as a personal project to make my swingarm fit while utilizing my stock wheels. I work at a machine shop so, this is what my projects often look like. This bracket and bushing kit is well thought out and precise to give trouble free installation. It is designed to be strong...
Top