b1h

Instead of uploading 300 step by step pictures ill just show you the before and after! :) This was when i got it, a few crappy mods and wasn't in the best condition but i picked it up cheap! After a bit of TLC, countless mods, chopping, drilling and a lot of paint! :bigsmile: any...

Hi there I have recently stripped my motor to replace a bearing on the input transmission shaft that let go. During this the camshaft position sensor got damaged and now when I tried to fire the bike up it will not start and the fi light flashes. It shows code 23 for the above sensor so I have...

Ive been running through this forum looking for answers to my questions. i found this topic is outdated (2012). On my b1h 03, i have a slip on, k and n air filter. When on night time "cruises" friends are telling me that the exhaust is spitting out flames alot!. Due to these mods, do i need a...

Hi, I'm looking to get a Danmoto exhasut for my 2003 636 A1P, they only make them for B1H onwards. As they're both 636 can I just buy a B1H spec exhaust and fit it to my A1P? Is the fitting at the manifold the same? Any help or insight would be much appreciated! Thanks y'all. Jon

I as the title suggests I need some help with my 2003 zx6r rear shock. It's harder than Ross Kemp on viagra, and i want to replace it. I've had it proffesionally set up to my weight but it has made 0.99% difference. Apparently you can put in an 07 zx6r shock into my bike provided that i have...

hi i have a b1h 03 ninja. my problem is, i was bleeding my front brakes and the nipple cross threaded in the caliper so the thread is fooked. the hole has been re-threaded to m8 (m7 before) the nipple i have is m8 but wont seal so the nipple is always open. dous anyone know of a nipple size m8...

Hi have been looking for a headlight for a while now Any help much appreciated

hi i'm paul from swindon england and i have just joined this forum hope you like my bike