Kawasaki Ninja ZX-6R Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 270 Results
  1. The ZX6R
    I've a 2020 zx6r, had it for almost two years now. I love it, barely any issues. I'm interested in what I can do to make it faster without all out buying a liter bike. TIA
  2. Mechanical and Technical
    I need to change my fork oil on my 2015 zx6 with stock showa forks (rebuilt 7k miles ago for my weight, riding style, etc). The service manual makes it seem complicated. Saying I need to remove the piston rod assembly and use a rod guide case wrench. Can I simply loosen the top plug and leave...
  3. Mechanical and Technical
    Hi, so finishing up the valve adjustment on my 2016 636. I put the cam shaft covers back on, top cam chain guide, torqued it all put the cam chain tensioner in, reset it. Hand cranked the engine 180 degrees to the other TDC mark and it seemed fine. But I think the cam chain jumped teeth on the...
  4. Mechanical and Technical
    I’m doing the valves and a few other things on my 2016 zx6r. I noticed that my head gasket has a leak. I run water wetter and haven’t noticed any in the oil or any coolant loss. Or vice versa. I asked around a bit. Apparently if I were to replace it I’d need to machine the head to keep mating...
  5. Sold Z

    Want to Buy
    z
    $1 USD
  6. Mechanical and Technical
    I've got a 2016 ZX6 with 11000 miles on it. It has a noticeable top end noise (rattle, tapping maybe) on the right hand side where the cam tensioner and oil cooler is. It gets better when the engine is warm. It became much more noticeable when the weather cooled down here. I do believe it is...
  7. The Build Thread
    Wanted to do a bit of a build thread. Mostly for me to read back in X years in the future to remind myself all about it. So starting at the start I bought the bike last winter for a grand and rode it through the winter to keep miles off my 1190R which I chopped in for a 790R as a 30th birthday...
  8. The ZX6R
    Hey guys, new member on the forum :) I recently bought myself a 2008 zx6r with a 2009 engine and gas tank. The bike does run, but the throttle bodies need to be synced. The guy I bought it from made it "keyless," and the wiring is pretty scary tbh. I have a manual switch for the fuel pump and...
  9. The ZX6R
    Does anyone know if there are any differences in fitment? Will an exhaust that says 2013-18 fit the newer Zx6r? Some exhausts say 09-21 and other say 13-18 so there is no clear answers to this that I could find. Thank you in advance!
  10. New Member Introductions
    Name is Brett Parker I just picked up this 2016 ZX6R ABS KRT Edition over the weekend up in Dallas TX. Took it down to the coast this weekend and its by far my favorite bike that I have owned. Just picked up a bunch of aftermarket stuff from TST Industries this morning and an Ohlins steering...
  11. Want to Buy
    Hi everyone, I’m looking a slip on or full system exhaust at a decent price for my 2016 ZX6r. Lemme know what you got. Thx
  12. Mechanical and Technical
    Hi, I just found I have a bit of a leak from my front brakes on one side and I want replace the Tokico anyway because I don't like them. I've heard that there are direct compatible brakes from 2007+ ZX6R from Nissin or even ZX14 as direct bolt on's . Trouble is though I just put new rotors and...
  13. The ZX6R
    My SO is petite and is strained to reach and get ahold of even me while riding. I was looking for some passenger grab rails and found nothing besides a renntec grab bar and those tank handles that wouldn't work. The renntech looks perfect but before I try to figure out shipping from UK or...
  14. Mechanical and Technical
    I recently purchased a 03 636. Was told the bike sat over winter then wouldn’t start again. I’m lucky enough to have a buddy with a similar 03 636 he let me borrow to test parts. So far I’ve swapped coils, plugs, throttle bodies with injectors, tank, computer, and the fuse box. I’ve had no luck...
  15. Member Classifieds
    Full body work kit pulled off of my 2017 with 1500miles, bike was switched over to track bodywork, only damage is on nose fairing shown in pics. asking 1200. Shipping not included.
  16. Mechanical and Technical
    was out riding when noticed a difference in exhaust sound and performance. No metal sound or mechanical sound just exhaust. About 10 minutes later heard what sounded similar to a bad vehicle starter tick, motor died and will not crank now. No warning indicator lights flashed or came on the...
  17. Mechanical and Technical
    Hello, So I recently bought a 2015 zx6r fully stock. Equipped it with a decat pipe and akrapovic slip on but left the catalytic converters inside the headers. To compliment all of that I installed servo buddy and a o2 sensor eliminator, so that bike wouldn't run lean ( probably need a PC5 nad...
  18. Mechanical and Technical
    Hello Fellas , I Recently Bought A SC Project CRT Slip On For My 16 zx6r . I prefer the shorty look kind of how a m4 or 2Bros Sits. Has Anyone Done This? Also Would It Be TOO Obnoxious With Out The Cat? Heres An Example.
  19. Mechanical and Technical
    I have two 2005-06 Kawasaki Ninja ZX6R 636s. One is fully race-built, but came with normal weight springs. The levers are CRG adjustable foldable levers.. The other is street legal, but I rebuilt it from the ground up after 2 years of owning it. With the rebuild came the EBC racing clutch kit...
  20. Videos
    I love riding my2019 ZX6R. I commute on my bike every day. Hopefully next week I’ll have time to ride some canyons, but for now, here are some of my commute videos, where I’m just trying to have some fun. Please subscribe if you like my videos. There are more to come.
1-20 of 270 Results
Top