Search Results for ‘2013’

Recently blew my motor and need to drop it from the bike. I'm having some trouble getting the lower mounting bolt out, have a very difficult time turning it, and am already starting to strip the threads. So far been following steps from the manual and still no luck. Tried heating it, and using...

was out riding when noticed a difference in exhaust sound and performance. No metal sound or mechanical sound just exhaust. About 10 minutes later heard what sounded similar to a bad vehicle starter tick, motor died and will not crank now. No warning indicator lights flashed or came on the...

SOLD.

Hey zx6ers, first thread, first post, fingers crossed :BigGrin total rookie here... Got a zx6r 2013 and need to change the throttle cable pair. Found lots of affordable aftermarket parts online for models 2012 and less, wonder if they fit 2013. Anybody got experience with that? They look...

Happy new year guys, as the title said, my 2013 tailights suddenly had 2 dead led bulbs, so i tried to remove it and i found out that the glass is dead glued to the housing, kinda clueless to open it, is there any DIY that i can do to fix it? since the brand new is expensive and takes a...

============================================================== Post Update: 10/14/16 - only some parts remain, have sold about half. See last post for more info. ============================================================== Hi guys, As some of you may know, I was selling my 2013 ZX6R (this...

wassup guys, this is my first post and the first forum ive ever signed up for. I am so frustrated with this bike I bought a few days ago from a guy. So Im a first time rider, and have little knowledge about bikes overall(probably an overstatement). I bought a 2013 ZX6R no ABS from a person on...

Ok, I've got a 2013 636. I bought it brand new and currently have almost 4K miles on it. I have been running an m4 slip on for about a year now and I just recently bought a pcv (power commander v). I also just installed a K&N high flow filter as well. I installed the pcv with the two brothers...

Don't recall seeing a HowTo for this so I'll go ahead and create one. I'm known for doing them for the Infiniti M-series car on NICOClub.com. I learned how to work on my car thanks to similar threads, so try to give back when I can. That being said, I had initially purchased 1156 bulbs IIRC and...

Hi everyone, New to the forums. I have a question about frame sliders. I wanted to install some on my 2013 zxr, but I'm wondering if anyone knows the size of the engine bolts on each side? I typically never install anything myself, and this seems easy enough. Naturally, none of my sockets fit...

I bought a 2013 ZX6R 636 brand new this last December. Ever since I got it my gas light comes on at the 70-80 mile mark. I wind up filling up every two days! One time I figured the light might be turning at the half way point and I wound up running out of gas on the freeway. I pushed it a mile...

Does anyone have any aftermarket seats? How do you like them?? The only one I really know about is the saddlemen sport. I have a low inseam though and am wondering if they raise height in anyway.

Okay, I was installing signal lights and fender eliminator on my 2013 zx6r, I have done this before, but this time there wasnt clear instructions. It is the signal lights that come with the 2 brothers slip on exhaust. Anyways, something has happened that my front or rear signal lights don't...

I looked by have found nothing, has anyone installed adjustable vortex rearsets on a 2013+ abs zx6r?

I'm looking at getting a zx6r soon but i don't know whether i should get a new 2013 one stock or just go with an 09 with upgrades, the 09 i was looking at Ninja zx 6r Kawasaki Green w/ great extras and fresh underglow or the 2013 2013 ZX6R KAWASAKI NEW LIMITED TIME i'm not sure of what the...

Hello everyone first time post, but long time follower of the site! Actually this site helped me make the choice between this bike or the Triumph 675! So I'm back to riding again after a 6 year hiatus. Had my license for about 16 years, but got rid of everything after our big country downfall.:(...

Hi Guys, I'm looking for a 2013 636 ABS White in Australia, new or near new. If you know any dealers that have stock or someone that wants to sell their bike, let me know! Thanks in advance. Ben

i bought a set of vortex -1/+2 sprockets for my 09, but before i could install them i traded up to the new 636. The sprockets will apparently fit the 2013, but there is no speedo healer available. Contacted 12 oclock labs, said kawi changed the way they send the speed reading to the speedo...